Monday 5 June 2017

Medieval Spinning



I feel very lucky to have acquired 3 medieval lead whorls from the vicinity of my village so that I can see how they spin. I am very grateful to the member of the History Group for this opportunity. I have put two whorls in store and am trying with one of them. 
It looks like this : 

 

Weight is 31.4g total diameter is 2.1. cm, height 1 cm and the diameter of the hole is 8 mm. I first tried to spin by putting a bamboo chopstick through the centre- the elastic band is a purely a safety measure on my part!  The whorl appears to have been used like this:
 

I did manage to spin some local Norfolk Horn fleece and as you can see it is giving  a fine thread. However, the whorl does not spin for long and I couldn't believe it was used for lots of spinning like this. 

So having spent some time, looking at medieval photos and researching further it became obvious that I needed a different shaped spindle. It is likely that a distaff - in medieval times - was held in the left  hand and the spindle was twisted / flicked by the right hand - in a continuous movement. (1) I also obtained advice on the shape of the cop needed, double ended with a swollen centre as this will put less pressure on the whorl which is just pushed up the spindle. 

I knew just the man to help me with my search for a spindle - David Whatley- a very skilled artist and craftsman. So Bank Holiday Monday saw us at his studio in Diss(2)  while I explained what I thought I needed. David had sourced some local spindle wood and sized up the whorl, discussed size with me etc and set about making a spindle. It was fantastic to see the small branch turn into the beautiful spindle. I am in awe of the skill and understanding shown. 
j 

This is the whorl on the spindle and you can see that I have managed to spin quite finely. By increasing the diameter of the yarn produced slightly ( to about 2 diameters of sewing thread) I could get a good result. The pointed top end is a joy to use as very little hand movement is needed to get a rotation. ( I am using it as a more usual drop spindle with a half hitch at the moment). We have talked about a further refinement later for when I use it with the distaff. 

Having completed the spindle wood spindle, David made spindle two out of oak. This has a less fine grain than the spindle wood but came up a beautiful colour with oil. 
 
 

I was VERY pleased with these. 

So now I have local fleece, a local whorl and local wood made into spindles and know the story behind each. This is all very special. 

I am in the early stages of preparing some posts about spinning in the past in my local area, so keep watching! 

(2) David is a member of Designermakers 21 in Diss, a very special place housing 12 professional craftspeople. You can visit Thursday - Saturday 10- 5.
www.designermakers21.co.uk



 



 

2 comments:

  1. A wonderful piece of local history. I was interested to learn of the existence of spindle wood too.

    ReplyDelete
  2. I await your findings, very interesting.

    ReplyDelete