Wednesday 8 April 2020

The teal cardigan





I have had a cone of teal crepe yarn for years. It has been used for machine knitting samples, including the one for this  ‘knit weave’ on the knitting machine 

The cushion with some ribbon yarn from Colinette many years ago. 




I hoped there was enough left to knit another of my favourite cardigans, and there was! 

I used my normal pattern developed over the years but this time I decided to add hand manipulated lace to the edges of the sleeves. 




I am pleased with it but the lace took 45 minutes, the majority of the time for machine knitting each sleeve. It is worth it though, I like added details. 

All the pieces were blocked before constructing. 

The shoulders were joined on the knitting machine. 

All other  seams were done on the sewing machine as I have detailed elsewhere (1) 

I am very pleased with it. It picks up a colour in the tweed of my wool skirt. 



It also matches some of my dresses which I am more likely to start wearing if this hot sunny weather continues. 


The finished cardigan on the duplicate body model. This has been difficult to photograph but I think these photos give a good impression. 



Whilst searching for samples, I found this one that I love, the crepe and grey sewing thread knit in a technique called ‘punch lace’. Perhaps the 110 g I have left is enough for an elegant summer top, but then maybe I won’t chance my luck  but look for another similar colour crepe! That will also mean working on my vintage Knitmaster 700 knitting machine taker than the a brother I normally use. 



  1. See details of the construction of seams in the post about the ground elder cardigan






Monday 6 April 2020

A classic jumper

I like to have some basic, smart, fine wool, knitted jumpers that I can layer more interesting knitwear over. For several years I have had a couple of cream ones, that I machine knitted in Yeoman polo fine merino wool. These have been washed many times and just keep on looking great. 

I decided I needed some grey ones, finding just the right shade of grey was problematic but eventually I found a grey colour that I really liked - it is lambs wool  in 2/ 17 colour Pearl Grey. It comes from Uppingham Yarns as a cone of approx a kilo, mine was 0.970 g. 

I drafted this pattern some time ago. It is very simple and has fitted sleeves. 

However, being plain and very simple there is nowhere to hide. Any slight error sticks out a mile. 

These are the samples I knit before I started. I was looking to get a good edge to the rib and a suitable tension. Hence the strip and then the square to get my measurements for stitches and rows per inch. 



Knitting went to plan. (I have described knitting using my knitting machine elsewhere on my blog)

Blocking the pieces ensures that they must fit me, with no nasty surprises like the sleeves are too long or the jumper is too short. 




Initially I used a single 1x1 rib for the base of the back, front and sleeves. The neck is done by the ‘cut and sew’ method that I use. 

Cut and sew neck



I join the shoulders on the knitting machine 

Shoulder join 




Other  seams  (but not ribs) I sew with my Janome sewing machine. The ribs I stitch together from the outside to get the best match I can with no visible  joins. 


The jumper weighs just 150 g and I finished this first one before Christmas. It has had good wear and is still looking ‘as new’. 


I decided that I couldn’t better this design or colour so I have just knitted another. Version 2 has 2x1 ribbing at the base of the body pieces and sleeve. 


Mattress stitch ribbing 




The completed jumper 

I love how the sleeves fit and I love this yarn. 


Jumper v2 complete 



Yet again the 30 year old plus  Brother 830 Knitting Machine delivers. 

So only 300 g of yarn used , 150 g per jumper and 670g left.